The ProJointTM SBR products are a water-based emulsion of a modified styrene-butadine polymer and have been designed to improve the strength and workability of sand and cement mortar. They can also be used for priming the surface of natural stone or cement slabs or setts to promote adhesion.

With non-foaming properties ProJointTM SBR controls the density of the mortar and results in a significant increase in compressive, tensile and flexural strength.

For peace of mind that your paving will be securely bedded with additional benefits such as an excellent freeze:thaw resistance and mortar durability, you can choose between our High Performance or Contract SBR.

5mm + type spacers by Raimondi in packs of 200 or 1000.

S – 5mm
A – 50mm
B – 50mm
H – 6mm

Our Raimondi VITE Levelling Clips are intended for use with the Raimondi Levelling System VITE Caps.  They are suitable for tiles 14-26mm thick and a 1mm grout joint.

Raimondi RLS Vite Caps.

Our Raimondi VITE Levelling Caps are intended for use with the Raimondi Levelling System VITE clips.

The ProJoint Porcelain Primer is an ultra-high polymer and fibre modified flexible primer with excellent workability and adhesion properties. As a single coat fast application, ProJoint Porcelain Primer promotes adhesion and control suction on difficult substrates such as porcelain, concrete, ceramic tiles, paving slabs or setts.

Using the ProJoint Porcelain Primer enables the porcelain slabs or setts to be laid on a sand and cement bedding. 

The powdered primer is available either tubbed with two 10kg bags to allow the bucket to act as the ideal mixing vessel with the simple addition of water or in loose 10kg bags* for a more economical option.

*Only available in full pallets of 100 units

KEY FACTS:

• Permeable bedding mix not required
• Part mixed components for fast application, all supplied within the mixing tub
• Professional strength, self-compacting and suitable for joint widths of 5mm upwards and min depth of 25mm
• Weed, pressure washer and frost resistant
• Ideal for paths and patios as well as driveways or other vehicular areas (up to 10 tonnes)
• Permeable
• Suitable for natural stone and concrete paving, setts and slabs
• Professional & experienced DIY users
• NOT suitable for porcelain, please use RapidFlow brush in compound or TileJam

• Pave-Gard 4 – Concrete Paving Sealer is a sealant that will enhance, seal and protect all types of concrete block paving as well as all types of concrete paving flagstones.Pave-Gard 4 – Concrete Paving Sealer will enhance the colour of the stone and leave a GLOSS / SATIN / WET LOOK finish.

  5 litre tub

  £62.50 per tin plus vat

  or…

  £75.00 per tin including vat

  A 5 litre tub of Pave-Gard No4 – Concrete Block Sealer covers approximately 35m2 depending on the porosity of the stone.

  Please refer to manufacturer’s instructions before use.

  NB – 1 to 3 tins will incur a £17.50 plus vat delivery / carriage charge. For 4 tins and over, delivery is free.

  On new patios we recommend waiting at least 6 weeks before using this product.

• Pave-Gard 3 Concrete Paving Sealer is a non-hazardous water based coating that will enhance, seal and protect all types of concrete block paving and concrete paving slabs. It also acts a a joint stabiliser for the brush in silica sand.

  It can also be used on all types of concrete paving flagstones.

  Pave-Gard 3 Concrete Paving Sealer will enhance the colour of the paving and generally leaves a MATT finish.

  *** Pave-Gard 3 – Has been on the market for over 30 years and is still recognised as the best paving sealant currently available!

  5 litre tub
  

  £47.50 per tub plus vat

  or…

  £57.00 per tub including vat

  A 5 litre tub covers approximately 35m2 depending on the porosity of the stone.
  Please refer to manufacturer’s instructions before use.

  NB – 1 to 4 tubs will incur a £17.50 plus vat delivery / carriage charge. For 5 tubs and over, delivery is free.

  On new patios we recommend waiting at least 6 weeks before using this product.

• Pave-Gard 2 – Natural Stone Sealer is a sealant that will enhance, seal and protect Natural Indian Sandstone, Indian Limestone (one coat), other types of Natural Stone. It is also suitable for sealing porcelain.Pave-Gard 2 – Natural Stone Sealer will enhance the colour of the stone and leave a GLOSS / SATIN / WET LOOK finish.

  5 litre tub

  £62.50 per tin plus vat

  or…

  £75.00 per tin including vat

  A 5 litre tub of Pave-Gard No2 – Natural Stone Sealer covers approximately 35m2 depending on the porosity of the stone.
  Please refer to manufacturer’s instructions before use.

  NB – 1 to 3 tins will incur a £17.50 plus vat delivery / carriage charge. For 4 tins and over, delivery is free.

  On new patios we recommend waiting at least 6 weeks before using this product.

• Pave-Gard 1 – THE ORIGINAL Natural Stone Sealer – is a non-hazardous water based coating that will enhance, seal and protect Natural Indian Sandstone, Indian Limestone (one coat), other types of Natural Stone and Terracotta. It is also suitable for sealing porcelain tiles (one coat).

  This sealant will enhance the colour of the stone and generally leaves a MATT finish.

  *** Pave-Gard 1 – THE ORIGINAL – Has been on the market for over 30 years and is still recognised as the best paving sealant currently available!

  5 litre tub
  

  £47.50 per tub plus vat

  or…

  £57.00 per tub including vat

  A 5 litre tub of Pave-Gard Stone Sealer covers approximately 35m2 depending on the porosity of the stone.
  Please refer to manufacturer’s instructions before use.

  NB – 1 to 4 tubs will incur a £17.50 plus vat delivery / carriage charge. For 5 tubs and over, delivery is free.

  On new patios we recommend waiting at least 6 weeks before using this product.